Skip to content

Fujikura 90S+ Fusion Splicer With CT-50 Cleaver

Fujikura 90S+ is a fusion splicer with a high precision lenses, which provide an accurate core-to-core alignment. Also, these lenses allow the splicer to discriminate between fiber types.


  • Splicing time: 7-9 sec (SM FAST mode).
  • Heat time: 13-15 sec (for 60 mm sleeves).
  • Core alignment technology.
  • Advanced image processing technology.
  • Fiber discrimination function.
  • The faster automated features.
  • Time for opening wind protector is 80% lower comparing to the Fujikura 80S.
  • Time for placing fiber into heater is 50% lower comparing to the Fujikura 80S.
  • Easy fiber protection sleeve positioning.
  • The lid of the carrying case may be used as a work table.
  • Plenty of space in the carrying case. There are two drawers for storage, and the work tray can be divided into two separate places.
  • The sheath clamp is compatible with loose tube fiber.
  • Wireless data connectivity allows automatic cleaver blade rotation when the splicer judges the blade is worn.
  • The tool can connect two cleavers simultaneously.
  • Blade life management: the device displays the remaining blade life, informs about blade height and position change, and when new blade is required.
  • Operation manual is installed into the splicer.
  • Battery life increased up to 500 recharge cycles.
  • Increased electrode lifetime – up to 5000 splicing cycles with one set.
  • 5-inch color TFT touch screen display.

Technical Specifications

Fiber alignment methodactive core alignment
Applicable fiberfiber typeSingle mode optical fiber
Multi mode optical fiber
cladding diameter80 μm – 150 μm
Applicable coatingsheath clampcoating diameter: max. 3 000 μm
cleave length: 5 mm – 16 mm
Fiber splice performancesplice lossITU-T G.652: avg. 0.02 dB
ITU-T G.651: avg. 0.01 dB
ITU-T G.653: avg. 0.04 dB
ITU-T G.655: avg. 0.04 dB
ITU-T G.657: avg. 0.02 dB
splice timeSM FAST mode: avg. 7 sec – 9 sec
AUTO mode: 14 sec – 16 sec
Applicable protection sleevesleeve typeheat shrinkable sleeve
sleeve lengthmax. 66 mm
sleeve diametermax. 6.0 mm before shrinking
Sleeve heat performanceheat time60 mm slim mode: avg. 9 sec – 10 sec
60 mm mode: avg. 13 sec – 15 sec
Fiber tensile test forceapprox. 2.0 N
Electrode lifeapprox. 5 000 splices
Dimensions (W × D × H)170 × 173 × 150 mm
Weight2.8 kg (with battery)
Environmental conditiontemperatureoperate: -10°C – +50°C
storage: -40°C – +80°C
humidityoperate: 0% – 95% RH non-condensing
storage: 0% – 95% RH non-condensing
altitudemax. 5 000 m
AC adaptorinputAC 100 to 240 V, 50/60 Hz, max. 1.5 A
Battery packtyperechargeable lithium-ion
outputapprox. DC 14.4 V / 6,380 mAh
capacityapprox. 300 splice and heat cycles
temperaturerecharge: 0°C – 30°C
storage: -20°C – +30°C
battery lifeapprox. 500 recharge cycles
DisplayLCD monitorTFT 5 inches with touch screen
magnification200 to 300x
IlluminationV-groovesLED lamp
InterfacePCUSB2.0 Mini B type
external LED lampUSB2.0 A type
approx. DC 5 V, 500 mA
ribbon stripperMini DIN 6 pin
DC 12 V, max. 1 A
wirelessBluetooth 4.1 LE
Data storagesplice mode100 splice modes
heat mode30 heat modes
splice result20 000 splices
splice image100 images
Screw hole for tripod1/4-20UNC
Other featuresautomatic functionssplice mode select by fiber type analysis
discharge power calibration
wind protector: open/close
sheath clamp: open
heater lid: open/close
heater clamp: open/close
reference guidevideo and PDF file stored in splicer
sheath clampeasy sleeve positioning clamp
electrodereplaceable without tool


There are no reviews yet.

Be the first to review “Fujikura 90S+ Fusion Splicer With CT-50 Cleaver”

Your email address will not be published. Required fields are marked *

Translate »